Skip to content
Fault code dictionary (DTC)

B1749 — Park/neutral switch: circuit fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe module has detected a problem in the circuit of the switch that reports whether the transmission is in park or neutral. The code is manufacturer-defined and I do not have reliable information on how each brand uses it: on some cars it allows engine start, on others it serves other functions. The signal received does not match the lever position.
FamilyBody (B)

Typical symptoms

The engine will not start or starts only in certain lever positions
The starter does not crank
Reverse lights do not come on or stay on
The automatic gearbox shifts poorly or the dashboard shows the wrong position
A warning light or fault message appears

Common causes

Park/neutral switch (or gear position sensor) dirty, misadjusted or worn
Loose or corroded connector
Damaged wiring near the gearbox
Shift lever or linkage out of adjustment
A fault in the module reading the signal

What to do

Try starting while moving the lever between park and neutral and see whether behavior changes. Check the connector and wiring near the gearbox. If the car will not start or the gear position is uncertain, avoid using it until it is checked: it may not respond as you expect.

How to read code B1749

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code B1749 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code B1749 mean?

Park/neutral switch: circuit fault. The module has detected a problem in the circuit of the switch that reports whether the transmission is in park or neutral. The code is manufacturer-defined and I do not have reliable information on how each brand uses it: on some cars it allows engine start, on others it serves other functions. The signal received does not match the lever position.

Can I keep driving with code B1749 active?

With caution: limp mode possible, have it checked soon

Common causes — B1749

Park/neutral switch (or gear position sensor) dirty, misadjusted or worn Loose or corroded connector Damaged wiring near the gearbox Shift lever or linkage out of adjustment A fault in the module reading the signal

How do you fix code B1749?

Try starting while moving the lever between park and neutral and see whether behavior changes. Check the connector and wiring near the gearbox. If the car will not start or the gear position is uncertain, avoid using it until it is checked: it may not respond as you expect.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes