Skip to content
Fault code dictionary (DTC)

B1753 — Hazard flash output circuit: fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe module has detected a problem in the circuit that controls the hazard lights (all four turn signals). The code is manufacturer-defined and the exact test may vary between brands. The output command does not produce the expected effect.
FamilyBody (B)

Typical symptoms

The hazard lights do not flash
They flash irregularly or too fast
Normal turn signals work but hazards do not, or vice versa
The hazard button does not light up
Possible lighting fault message

Common causes

Blown bulb or incompatible LED bulb
Worn hazard button
Loose or corroded connector or ground
Damaged wiring
A fault in the module that controls flashing

What to do

First check the bulbs on all turn signals and the fuses. Hazard lights are for signalling an emergency, so do not delay: if they do not work, keep the warning triangle at hand and have it checked soon.

How to read code B1753

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code B1753 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code B1753 mean?

Hazard flash output circuit: fault. The module has detected a problem in the circuit that controls the hazard lights (all four turn signals). The code is manufacturer-defined and the exact test may vary between brands. The output command does not produce the expected effect.

Can I keep driving with code B1753 active?

With caution: limp mode possible, have it checked soon

Common causes — B1753

Blown bulb or incompatible LED bulb Worn hazard button Loose or corroded connector or ground Damaged wiring A fault in the module that controls flashing

How do you fix code B1753?

First check the bulbs on all turn signals and the fuses. Hazard lights are for signalling an emergency, so do not delay: if they do not work, keep the warning triangle at hand and have it checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes