B1755 — Hazard flash output circuit: shorted to battery
| Meaning | The module has measured battery voltage on the hazard flash output circuit where there should be none. It can come from a wire touching a live cable or from a module fault. The code is manufacturer-defined and the test may vary between brands. |
| Family | Body (B) |
Typical symptoms
Turn signal fuse blown
The lights do not respond to the button
Irregular flashing
Possible lighting fault message
Common causes
Harness pinched in the lamp assemblies or trunk
Moisture in connectors or lamp assemblies
Faulty hazard button
A fault in the module that controls flashing
What to do
How to read code B1755
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code B1755 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B1755 mean?
Hazard flash output circuit: shorted to battery. The module has measured battery voltage on the hazard flash output circuit where there should be none. It can come from a wire touching a live cable or from a module fault. The code is manufacturer-defined and the test may vary between brands.
Can I keep driving with code B1755 active?
With caution: limp mode possible, have it checked soon
Common causes — B1755
Wire with damaged insulation touching a live cable Harness pinched in the lamp assemblies or trunk Moisture in connectors or lamp assemblies Faulty hazard button A fault in the module that controls flashing
How do you fix code B1755?
Check the fuse and look for moisture or damaged wires in the lamp assemblies and connectors. A wire touching positive can heat up, so do not delay. Never replace the fuse with a higher-rated one.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: B1754 — Hazard flash output circuit: open
- Next code: B1756 — Hazard flash output circuit: shorted to ground
Related codes
- B1700 — Passenger seatbelt tension reducer circuit short to ground
- B1701 — Driver seat recline forward switch circuit failure
- B1702 — Driver seat recline forward switch circuit open
- B1703 — Driver seat recline forward switch circuit short to battery
- B1704 — Driver seat recline forward switch circuit short to ground
- B1705 — Driver seat recline rearward switch circuit failure
- B1706 — Driver seat recline rearward switch circuit open
- B1707 — Driver seat recline rearward switch circuit short to battery
- B1708 — Driver seat recline rearward switch circuit short to ground
- B1709 — Driver seat front up switch circuit failure
- B1710 — Driver seat front up switch circuit open
- B1711 — Driver seat front up switch circuit short to battery