Skip to content
Fault code dictionary (DTC)

B1763 — Driver seat front down circuit shorted to battery

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit has detected battery voltage on the driver's seat front-down circuit where it should not be. The code is manufacturer-defined and exact details vary by make.
FamilyBody (B)

Typical symptoms

The seat moves on its own or does not stop
The front of the seat stays down
The seat fuse blows
The motor gets hot or seems strained
Inconsistent seat controls

Common causes

Wire with worn insulation touching another live wire
Harness pinched by the rails
Switch with stuck contacts
Moisture in the connector under the seat
Faulty control module

What to do

If the seat moves without a command, pull the seat fuse and have it checked soon, because a continuously powered motor can overheat. Check the harness under the seat for worn or pinched insulation.

How to read code B1763

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code B1763 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code B1763 mean?

Driver seat front down circuit shorted to battery. The control unit has detected battery voltage on the driver's seat front-down circuit where it should not be. The code is manufacturer-defined and exact details vary by make.

Can I keep driving with code B1763 active?

With caution: limp mode possible, have it checked soon

Common causes — B1763

Wire with worn insulation touching another live wire Harness pinched by the rails Switch with stuck contacts Moisture in the connector under the seat Faulty control module

How do you fix code B1763?

If the seat moves without a command, pull the seat fuse and have it checked soon, because a continuously powered motor can overheat. Check the harness under the seat for worn or pinched insulation.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes