Skip to content
Fault code dictionary (DTC)

B1770 — Driver seat backward circuit open

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit has detected that the circuit driving the driver's seat backward is open: current is not reaching the motor. The code is manufacturer-defined and details can vary by make.
FamilyBody (B)

Typical symptoms

The seat does not move backward
No motor sound when you press the control
Forward movement works
Memory recall does not complete
The fault comes and goes as the seat moves

Common causes

Broken wire in the harness under the seat
Unplugged or corroded connector
Slide motor with a broken winding
Faulty switch
Damaged terminal in the module connector

What to do

Inspect the connector under the seat and the cables that flex as the seat slides. There is no driving risk, so urgency is low. Do not force the seat by hand on its rails.

How to read code B1770

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code B1770 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code B1770 mean?

Driver seat backward circuit open. The control unit has detected that the circuit driving the driver's seat backward is open: current is not reaching the motor. The code is manufacturer-defined and details can vary by make.

Can I keep driving with code B1770 active?

With caution: limp mode possible, have it checked soon

Common causes — B1770

Broken wire in the harness under the seat Unplugged or corroded connector Slide motor with a broken winding Faulty switch Damaged terminal in the module connector

How do you fix code B1770?

Inspect the connector under the seat and the cables that flex as the seat slides. There is no driving risk, so urgency is low. Do not force the seat by hand on its rails.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes