Skip to content
Fault code dictionary (DTC)

B1774 — Driver mirror up circuit open

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit has detected that the circuit tilting the driver's side mirror upward is open: current is not reaching the motor. The code is manufacturer-defined and details can vary by make.
FamilyBody (B)

Typical symptoms

The mirror does not tilt upward
No motor sound when you press the control
The other adjustment directions work
Memory recall does not bring the mirror into position
The fault comes and goes as the door is opened and closed

Common causes

Broken wire in the door harness
Unplugged or corroded mirror connector
Internal mirror motor with a broken winding
Faulty adjustment control
Damaged terminal in the module connector

What to do

Inspect the mirror connector and the section of cables between door and pillar. If you can still see well behind with the mirror fixed, urgency is moderate; if the position is wrong and cannot be corrected, have it fixed soon. Do not force the mirror by hand with jerks.

How to read code B1774

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code B1774 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code B1774 mean?

Driver mirror up circuit open. The control unit has detected that the circuit tilting the driver's side mirror upward is open: current is not reaching the motor. The code is manufacturer-defined and details can vary by make.

Can I keep driving with code B1774 active?

With caution: limp mode possible, have it checked soon

Common causes — B1774

Broken wire in the door harness Unplugged or corroded mirror connector Internal mirror motor with a broken winding Faulty adjustment control Damaged terminal in the module connector

How do you fix code B1774?

Inspect the mirror connector and the section of cables between door and pillar. If you can still see well behind with the mirror fixed, urgency is moderate; if the position is wrong and cannot be corrected, have it fixed soon. Do not force the mirror by hand with jerks.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes