Skip to content
Fault code dictionary (DTC)

B1785 — Passenger mirror up circuit shorted to ground

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control module detected that the circuit for the passenger mirror upward movement is touching ground. This code is manufacturer-defined and I have no reliable brand information. The command signal is drained to ground and the motor does not work properly.
FamilyBody (B)

Typical symptoms

Mirror will not tilt up
Weak or no movement in that direction
Mirror fuse may blow
Other movements may work normally

Common causes

Wire pinched in the door or the pass-through to the body
Connector with moisture or damaged insulation
Shorted mirror motor
Faulty mirror switch
Door module with a damaged output

What to do

Have the passenger mirror wiring and connector checked, starting at the pass-through towards the pillar. It is not an immediate safety fault, but fix it before it damages the module.

How to read code B1785

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code B1785 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code B1785 mean?

Passenger mirror up circuit shorted to ground. The control module detected that the circuit for the passenger mirror upward movement is touching ground. This code is manufacturer-defined and I have no reliable brand information. The command signal is drained to ground and the motor does not work properly.

Can I keep driving with code B1785 active?

With caution: limp mode possible, have it checked soon

Common causes — B1785

Wire pinched in the door or the pass-through to the body Connector with moisture or damaged insulation Shorted mirror motor Faulty mirror switch Door module with a damaged output

How do you fix code B1785?

Have the passenger mirror wiring and connector checked, starting at the pass-through towards the pillar. It is not an immediate safety fault, but fix it before it damages the module.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes