Skip to content
Fault code dictionary (DTC)

B1787 — Passenger mirror down circuit open

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control module detects that the circuit for the passenger mirror downward movement is open, meaning broken. This code is manufacturer-defined and I have no reliable brand information. Without electrical continuity the motor does not receive the command.
FamilyBody (B)

Typical symptoms

Mirror does not move down when commanded
Other movements may still work
No motor sound in that direction
Mirror stuck in one position

Common causes

Broken wire in the door-to-body harness
Loose or corroded door connector
Burnt-out mirror motor
Mirror switch with a worn contact
Internal contact fault in the passenger door module

What to do

Have the wiring in the boot between door and pillar checked first, since it flexes at every opening. It is not a safety urgency, but do not delay too long.

How to read code B1787

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code B1787 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code B1787 mean?

Passenger mirror down circuit open. The control module detects that the circuit for the passenger mirror downward movement is open, meaning broken. This code is manufacturer-defined and I have no reliable brand information. Without electrical continuity the motor does not receive the command.

Can I keep driving with code B1787 active?

With caution: limp mode possible, have it checked soon

Common causes — B1787

Broken wire in the door-to-body harness Loose or corroded door connector Burnt-out mirror motor Mirror switch with a worn contact Internal contact fault in the passenger door module

How do you fix code B1787?

Have the wiring in the boot between door and pillar checked first, since it flexes at every opening. It is not a safety urgency, but do not delay too long.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes