C1107 — ABS function enabled input circuit fault
| Meaning | This code is defined by the manufacturer, so the exact meaning depends on the brand. I don't have solid information on which signal is involved on every model. The reference definition says the input through which the ABS control unit gets permission to operate has a missing or inconsistent signal. |
| Family | Chassis (C) |
Typical symptoms
Traction control light on
ABS not active during braking
Intermittent warning light behavior
No obvious symptom in normal driving
Common causes
Broken or rubbed signal wiring
Faulty component sending the signal
Poor power or ground to the control unit
Internal fault in the ABS control unit
What to do
How to read code C1107
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code C1107 starts with C: it belongs to the chassis (brakes, steering, suspension) area. It is defined by the manufacturer, so the exact meaning can change from make to make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code C1107 mean?
ABS function enabled input circuit fault. This code is defined by the manufacturer, so the exact meaning depends on the brand. I don't have solid information on which signal is involved on every model. The reference definition says the input through which the ABS control unit gets permission to operate has a missing or inconsistent signal.
Can I keep driving with code C1107 active?
With caution: limp mode possible, have it checked soon
Common causes — C1107
Corroded control unit connector Broken or rubbed signal wiring Faulty component sending the signal Poor power or ground to the control unit Internal fault in the ABS control unit
How do you fix code C1107?
Have the power, grounds and connectors of the ABS control unit checked, then the data read with a tool suited to your brand. Normal brakes usually work, but ABS may not be available, so don't put it off too long.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: C1106 — Traction control disable switch circuit shorted to...
- Next code: C1109 — Speed control actuator cable release failure
Related codes
- C1100 — ABS pump switch circuit fault
- C1101 — ABS hydraulic valve circuit fault
- C1102 — ABS acceleration switch circuit fault
- C1103 — ABS brake switch circuit fault
- C1104 — Traction control active lamp circuit shorted to battery
- C1105 — Traction control disable lamp circuit shorted to battery
- C1106 — Traction control disable switch circuit shorted to battery
- C1109 — Speed control actuator cable release failure
- C1110 — ABS power relay coil circuit failure
- C1111 — ABS power relay coil open circuit
- C1112 — ABS power relay coil short circuit to ground
- C1113 — ABS power relay coil short circuit to battery