Skip to content
Fault code dictionary (DTC)

C1111 — ABS power relay coil open circuit

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThis code is defined by the manufacturer, and the meaning can change by brand. It generally means the ABS control unit finds the power relay coil circuit is interrupted, as if a wire were disconnected. The relay can't be driven and the ABS stays without power.
FamilyChassis (C)

Typical symptoms

ABS warning light on
Traction or stability control light on
ABS not active
No click from the relay
Fault present from start-up

Common causes

Broken wire or terminal pushed out of the connector
Corroded or loose connector
Open relay coil
Missing or badly seated relay
Internal fault in the ABS control unit

What to do

Have it checked that the relay is present and properly seated and that connectors are fine, then wire continuity. Normal brakes usually work, but ABS won't, so it's better to act soon.

How to read code C1111

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code C1111 starts with C: it belongs to the chassis (brakes, steering, suspension) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code C1111 mean?

ABS power relay coil open circuit. This code is defined by the manufacturer, and the meaning can change by brand. It generally means the ABS control unit finds the power relay coil circuit is interrupted, as if a wire were disconnected. The relay can't be driven and the ABS stays without power.

Can I keep driving with code C1111 active?

With caution: limp mode possible, have it checked soon

Common causes — C1111

Broken wire or terminal pushed out of the connector Corroded or loose connector Open relay coil Missing or badly seated relay Internal fault in the ABS control unit

How do you fix code C1111?

Have it checked that the relay is present and properly seated and that connectors are fine, then wire continuity. Normal brakes usually work, but ABS won't, so it's better to act soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes