C1112 — ABS power relay coil short circuit to ground
| Meaning | This code is defined by the manufacturer, and the meaning can vary by brand. It generally means the ABS control unit sees too low a voltage on the power relay coil circuit, as if the wire were touching ground. The relay may stay energized or not work, and the ABS is switched off. |
| Family | Chassis (C) |
Typical symptoms
Traction or stability control light on
ABS disabled
Fuse blowing again after replacement
Unusual relay noise
Common causes
Connector with water or corrosion
Relay coil shorted
Faulty relay
Internal fault in the ABS control unit
What to do
How to read code C1112
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code C1112 starts with C: it belongs to the chassis (brakes, steering, suspension) area. It is defined by the manufacturer, so the exact meaning can change from make to make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code C1112 mean?
ABS power relay coil short circuit to ground. This code is defined by the manufacturer, and the meaning can vary by brand. It generally means the ABS control unit sees too low a voltage on the power relay coil circuit, as if the wire were touching ground. The relay may stay energized or not work, and the ABS is switched off.
Can I keep driving with code C1112 active?
With caution: limp mode possible, have it checked soon
Common causes — C1112
Coil wire with damaged insulation touching ground Connector with water or corrosion Relay coil shorted Faulty relay Internal fault in the ABS control unit
How do you fix code C1112?
Have the wiring, connectors and relay checked, looking for rubbed or damp wires. If a fuse keeps blowing, don't fit a bigger one: have the cause found. The base brakes usually work, but ABS won't.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: C1111 — ABS power relay coil open circuit
- Next code: C1113 — ABS power relay coil short circuit to battery
Related codes
- C1100 — ABS pump switch circuit fault
- C1101 — ABS hydraulic valve circuit fault
- C1102 — ABS acceleration switch circuit fault
- C1103 — ABS brake switch circuit fault
- C1104 — Traction control active lamp circuit shorted to battery
- C1105 — Traction control disable lamp circuit shorted to battery
- C1106 — Traction control disable switch circuit shorted to battery
- C1107 — ABS function enabled input circuit fault
- C1109 — Speed control actuator cable release failure
- C1110 — ABS power relay coil circuit failure
- C1111 — ABS power relay coil open circuit
- C1113 — ABS power relay coil short circuit to battery