Skip to content
Fault code dictionary (DTC)

C1204 — ABS rear outlet valve shorted to battery voltage

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe ABS control unit detected a voltage on the rear outlet valve coil circuit as if it were touching battery positive. C1204 is a manufacturer-defined code and I have no reliable information on its exact meaning for every brand. ABS is usually disabled as a precaution.
FamilyChassis (C)

Typical symptoms

ABS warning light on
Traction or stability control light on
Anti-lock not available
Stability control limited or disabled
Sometimes appears intermittently

Common causes

Wire insulation damaged and touching a power feed
Damaged or wet connector at the ABS unit
Internal short in the valve coil
Fault in the control unit's driver circuit
Harness rubbed along its route to the rear

What to do

Have the harness and connector at the ABS unit checked for rubbing, water or corrosion, then the circuit measured. The basic brakes usually remain, but avoid sudden hard braking and do not leave the check for long.

How to read code C1204

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code C1204 starts with C: it belongs to the chassis (brakes, steering, suspension) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code C1204 mean?

ABS rear outlet valve shorted to battery voltage. The ABS control unit detected a voltage on the rear outlet valve coil circuit as if it were touching battery positive. C1204 is a manufacturer-defined code and I have no reliable information on its exact meaning for every brand. ABS is usually disabled as a precaution.

Can I keep driving with code C1204 active?

With caution: limp mode possible, have it checked soon

Common causes — C1204

Wire insulation damaged and touching a power feed Damaged or wet connector at the ABS unit Internal short in the valve coil Fault in the control unit's driver circuit Harness rubbed along its route to the rear

How do you fix code C1204?

Have the harness and connector at the ABS unit checked for rubbing, water or corrosion, then the circuit measured. The basic brakes usually remain, but avoid sudden hard braking and do not leave the check for long.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes