Skip to content
Fault code dictionary (DTC)

C1206 — ABS rear inlet valve circuit failure

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe ABS control unit detected a general fault in the rear inlet valve coil circuit, without saying whether it is open or shorted. C1206 is a manufacturer-defined code and I have no reliable information on its exact meaning for every brand. Rear anti-lock may be reduced.
FamilyChassis (C)

Typical symptoms

ABS warning light on
Traction or stability control light on
Anti-lock missing or odd at the rear axle
Stability control limited
Fault sometimes intermittent

Common causes

Corroded or loose connector at the ABS unit
Damaged or rubbed harness
Faulty valve coil in the hydraulic unit
Low or unstable supply to the control unit
Internal fault of the ABS control unit

What to do

First check the battery and grounds, then the connector and harness at the ABS unit; the coil is measured after. The rear wheels may lock more easily in hard braking: drive carefully and have it checked soon.

How to read code C1206

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code C1206 starts with C: it belongs to the chassis (brakes, steering, suspension) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code C1206 mean?

ABS rear inlet valve circuit failure. The ABS control unit detected a general fault in the rear inlet valve coil circuit, without saying whether it is open or shorted. C1206 is a manufacturer-defined code and I have no reliable information on its exact meaning for every brand. Rear anti-lock may be reduced.

Can I keep driving with code C1206 active?

With caution: limp mode possible, have it checked soon

Common causes — C1206

Corroded or loose connector at the ABS unit Damaged or rubbed harness Faulty valve coil in the hydraulic unit Low or unstable supply to the control unit Internal fault of the ABS control unit

How do you fix code C1206?

First check the battery and grounds, then the connector and harness at the ABS unit; the coil is measured after. The rear wheels may lock more easily in hard braking: drive carefully and have it checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes