C1208 — ABS rear inlet valve shorted to battery voltage
| Meaning | The ABS control unit detected a voltage on the rear inlet valve coil circuit as if it were touching battery positive. C1208 is a manufacturer-defined code and I have no reliable information on its exact meaning for every brand. ABS is usually disabled as a precaution. |
| Family | Chassis (C) |
Typical symptoms
Traction or stability control light on
Anti-lock not available
Stability control limited or disabled
Sometimes appears intermittently
Common causes
Damaged or wet connector at the ABS unit
Internal short in the valve coil
Fault in the control unit's driver circuit
Harness rubbed along its route to the rear
What to do
How to read code C1208
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code C1208 starts with C: it belongs to the chassis (brakes, steering, suspension) area. It is defined by the manufacturer, so the exact meaning can change from make to make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code C1208 mean?
ABS rear inlet valve shorted to battery voltage. The ABS control unit detected a voltage on the rear inlet valve coil circuit as if it were touching battery positive. C1208 is a manufacturer-defined code and I have no reliable information on its exact meaning for every brand. ABS is usually disabled as a precaution.
Can I keep driving with code C1208 active?
With caution: limp mode possible, have it checked soon
Common causes — C1208
Wire insulation damaged and touching a power feed Damaged or wet connector at the ABS unit Internal short in the valve coil Fault in the control unit's driver circuit Harness rubbed along its route to the rear
How do you fix code C1208?
Have the harness and connector at the ABS unit checked for rubbing, water or corrosion, then the circuit measured. The basic brakes usually remain, but avoid sudden hard braking and do not leave the check for long.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: C1207 — ABS rear inlet valve circuit open
- Next code: C1209 — ABS rear inlet valve shorted to ground
Related codes
- C1200 — ABS left front inlet valve shorted to battery voltage
- C1201 — ABS left front inlet valve shorted to ground
- C1202 — ABS rear outlet valve circuit failure
- C1203 — ABS rear outlet valve circuit open
- C1204 — ABS rear outlet valve shorted to battery voltage
- C1205 — ABS rear outlet valve shorted to ground
- C1206 — ABS rear inlet valve circuit failure
- C1207 — ABS rear inlet valve circuit open
- C1209 — ABS rear inlet valve shorted to ground
- C1210 — ABS right front outlet valve circuit failure
- C1211 — ABS right front outlet valve circuit open
- C1212 — ABS right front outlet valve shorted to battery voltage