Skip to content
Fault code dictionary (DTC)

C1931 — Front air suspension compressor relay circuit short to battery

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control module sees battery voltage on the front air suspension compressor relay drive circuit where it should not be. The code is manufacturer-defined and I cannot confirm the system layout on your make. In some systems the relay can stay energised and the compressor can run more than it should.
FamilyChassis (C)

Typical symptoms

Compressor running for a long time or not stopping
Suspension warning light or message
Blown compressor fuse
Uneven front ride height

Common causes

Control wire touching a positive supply
Relay with stuck contacts
Wet or deformed connector
Damaged wiring
Control module output failure

What to do

If the compressor runs without stopping, switch the car off: the electric motor can overheat. Have the relay and wiring checked soon.

How to read code C1931

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code C1931 starts with C: it belongs to the chassis (brakes, steering, suspension) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code C1931 mean?

Front air suspension compressor relay circuit short to battery. The control module sees battery voltage on the front air suspension compressor relay drive circuit where it should not be. The code is manufacturer-defined and I cannot confirm the system layout on your make. In some systems the relay can stay energised and the compressor can run more than it should.

Can I keep driving with code C1931 active?

With caution: limp mode possible, have it checked soon

Common causes — C1931

Control wire touching a positive supply Relay with stuck contacts Wet or deformed connector Damaged wiring Control module output failure

How do you fix code C1931?

If the compressor runs without stopping, switch the car off: the electric motor can overheat. Have the relay and wiring checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes