P022C — Charge Air Cooler Bypass A: Control Circuit High
| Meaning | The engine computer detected a voltage that is too high on control A of the intercooler bypass valve, typical of a short to supply voltage or a driver fault. The valve may stay stuck in one position. The meaning of "A" depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Bypass valve stuck in one position
Intake air temperature out of range
Loss of performance or uneven fuel use
No clear symptom in mild cases
Common causes
Faulty valve actuator
Damaged connector with pins touching
Wiring modified or badly repaired
Faulty engine computer (rare)
What to do
How to read code P022C
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P022C starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (2) points to fuel and air metering (injector circuit), and the last two (2C) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P022C mean?
Charge Air Cooler Bypass A: Control Circuit High. The engine computer detected a voltage that is too high on control A of the intercooler bypass valve, typical of a short to supply voltage or a driver fault. The valve may stay stuck in one position. The meaning of "A" depends on the manufacturer.
Can I keep driving with code P022C active?
With caution: limp mode possible, have it checked soon
Common causes — P022C
Control wire shorted to supply voltage Faulty valve actuator Damaged connector with pins touching Wiring modified or badly repaired Faulty engine computer (rare)
How do you fix code P022C?
Check the valve wiring and connectors, especially earlier repairs or wires running beside other circuits. An activation test with a diagnostic tool shows whether the control responds. It is not as urgent as an engine fault, but have it looked at within a reasonable time.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P022B — Charge Air Cooler Bypass A: Control Circuit Low
- Next code: P022D — Charge Air Cooler Bypass B: Open Circuit
Related codes
- P0200 — Injector circuit: general electrical fault
- P0201 — Injector cylinder 1: circuit
- P0202 — Injector circuit cylinder 2: electrical fault
- P0203 — Injector circuit cylinder 3: electrical fault
- P0204 — Injector circuit cylinder 4: electrical fault
- P0205 — Injector circuit cylinder 5: electrical fault
- P0206 — Injector circuit cylinder 6: electrical fault
- P0207 — Injector circuit cylinder 7: electrical fault
- P0208 — Injector circuit cylinder 8: electrical fault
- P0209 — Injector circuit cylinder 9: electrical fault
- P020A — Injector 1: performance out of range
- P020B — Injector 2: performance out of range