P022D — Charge Air Cooler Bypass B: Open Circuit
| Meaning | The engine computer detected an open circuit on control B of the valve that diverts boost air around the intercooler. The electrical circuit is broken, so the valve cannot be commanded. What "B" refers to depends on the make, so the vehicle's wiring diagram should be checked. |
| Family | Powertrain (P) |
Typical symptoms
Intake air temperature not well managed
Loss of performance in some conditions
Uneven running under load
No obvious symptom in mild cases
Common causes
Broken control wire
Faulty bypass valve or actuator
Missing fuse or supply on the circuit
Faulty engine computer (rare)
What to do
How to read code P022D
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P022D starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (2) points to fuel and air metering (injector circuit), and the last two (2D) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P022D mean?
Charge Air Cooler Bypass B: Open Circuit. The engine computer detected an open circuit on control B of the valve that diverts boost air around the intercooler. The electrical circuit is broken, so the valve cannot be commanded. What "B" refers to depends on the make, so the vehicle's wiring diagram should be checked.
Can I keep driving with code P022D active?
With caution: limp mode possible, have it checked soon
Common causes — P022D
Connector unplugged or corroded Broken control wire Faulty bypass valve or actuator Missing fuse or supply on the circuit Faulty engine computer (rare)
How do you fix code P022D?
Start with the connector and wiring of the second bypass valve, then check the power supply. Try activating the valve with a diagnostic tool. It is not normally an emergency, but do not leave it unresolved for too long.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P022C — Charge Air Cooler Bypass A: Control Circuit High
- Next code: P022E — Charge Air Cooler Bypass B: Control Circuit Low
Related codes
- P0200 — Injector circuit: general electrical fault
- P0201 — Injector cylinder 1: circuit
- P0202 — Injector circuit cylinder 2: electrical fault
- P0203 — Injector circuit cylinder 3: electrical fault
- P0204 — Injector circuit cylinder 4: electrical fault
- P0205 — Injector circuit cylinder 5: electrical fault
- P0206 — Injector circuit cylinder 6: electrical fault
- P0207 — Injector circuit cylinder 7: electrical fault
- P0208 — Injector circuit cylinder 8: electrical fault
- P0209 — Injector circuit cylinder 9: electrical fault
- P020A — Injector 1: performance out of range
- P020B — Injector 2: performance out of range