Skip to content
Fault code dictionary (DTC)

P0239 — Turbo Boost Sensor B: Circuit Malfunction

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe engine computer detected a general fault in the circuit of turbo pressure sensor B, found on engines with two sensors or two turbos. The signal is missing, out of range or not believable. Which sensor is "B" depends on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Lack of turbo boost
Reduced power or limp mode
Abnormal exhaust smoke
Slow response when accelerating

Common causes

Corroded or loose sensor connector
Broken or shorted wiring
Dirty or faulty pressure sensor
Air leak near the sensor
Faulty sensor supply or ground
Faulty engine computer (rare)

What to do

Check the connector and wiring of sensor B and its air port. Then compare its reading with sensor A and the requested pressure. With reduced power, drive carefully and have it checked soon.

How to read code P0239

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0239 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (2) points to fuel and air metering (injector circuit), and the last two (39) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0239 mean?

Turbo Boost Sensor B: Circuit Malfunction. The engine computer detected a general fault in the circuit of turbo pressure sensor B, found on engines with two sensors or two turbos. The signal is missing, out of range or not believable. Which sensor is "B" depends on the manufacturer.

Can I keep driving with code P0239 active?

With caution: limp mode possible, have it checked soon

Common causes — P0239

Corroded or loose sensor connector Broken or shorted wiring Dirty or faulty pressure sensor Air leak near the sensor Faulty sensor supply or ground Faulty engine computer (rare)

How do you fix code P0239?

Check the connector and wiring of sensor B and its air port. Then compare its reading with sensor A and the requested pressure. With reduced power, drive carefully and have it checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes