P023A — Charge Air Cooler Coolant Pump A: Open Circuit
| Meaning | The engine computer detected an open circuit on control A of the pump that circulates coolant through the water-cooled intercooler. The electrical circuit is broken and the pump cannot be commanded. Without circulation, the boost air is cooled less. The exact role of "A" depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Loss of performance when accelerating
Intake air hotter than normal
Power reduced by the computer
Pump that cannot be heard running
Common causes
Broken control wire
Failed coolant pump
Missing fuse or relay on the circuit
Faulty engine computer (rare)
What to do
How to read code P023A
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P023A starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (2) points to fuel and air metering (injector circuit), and the last two (3A) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P023A mean?
Charge Air Cooler Coolant Pump A: Open Circuit. The engine computer detected an open circuit on control A of the pump that circulates coolant through the water-cooled intercooler. The electrical circuit is broken and the pump cannot be commanded. Without circulation, the boost air is cooled less. The exact role of "A" depends on the manufacturer.
Can I keep driving with code P023A active?
With caution: limp mode possible, have it checked soon
Common causes — P023A
Pump connector unplugged or corroded Broken control wire Failed coolant pump Missing fuse or relay on the circuit Faulty engine computer (rare)
How do you fix code P023A?
Check the pump connector, fuse and wiring, then see with a diagnostic tool whether it switches on. Avoid prolonged heavy loads until it is fixed, since overly hot intake air strains the engine.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0239 — Turbo Boost Sensor B: Circuit Malfunction
- Next code: P023B — Charge Air Cooler Coolant Pump A: Control Low
Related codes
- P0200 — Injector circuit: general electrical fault
- P0201 — Injector cylinder 1: circuit
- P0202 — Injector circuit cylinder 2: electrical fault
- P0203 — Injector circuit cylinder 3: electrical fault
- P0204 — Injector circuit cylinder 4: electrical fault
- P0205 — Injector circuit cylinder 5: electrical fault
- P0206 — Injector circuit cylinder 6: electrical fault
- P0207 — Injector circuit cylinder 7: electrical fault
- P0208 — Injector circuit cylinder 8: electrical fault
- P0209 — Injector circuit cylinder 9: electrical fault
- P020A — Injector 1: performance out of range
- P020B — Injector 2: performance out of range