Skip to content
Fault code dictionary (DTC)

P024B — Charge air cooler bypass A stuck

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit has determined that the charge air cooler bypass has stayed in one position and does not move when requested. The boost air may then not be cooled as intended, or may always take the wrong path.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Loss of power, especially in hot air
Intake air temperature too high
Uneven running in some conditions
Possible protection mode

Common causes

Valve or linkage stuck by dirt or corrosion
Faulty bypass actuator
Disconnected or cracked vacuum hose
Broken wiring or connector
Mechanical damage to the valve

What to do

Check that the actuator and linkage move freely and that connections are sound. If you notice power loss, have the car checked soon to avoid stress on the engine.

How to read code P024B

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P024B starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (2) points to fuel and air metering (injector circuit), and the last two (4B) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P024B mean?

Charge air cooler bypass A stuck. The control unit has determined that the charge air cooler bypass has stayed in one position and does not move when requested. The boost air may then not be cooled as intended, or may always take the wrong path.

Can I keep driving with code P024B active?

With caution: limp mode possible, have it checked soon

Common causes — P024B

Valve or linkage stuck by dirt or corrosion Faulty bypass actuator Disconnected or cracked vacuum hose Broken wiring or connector Mechanical damage to the valve

How do you fix code P024B?

Check that the actuator and linkage move freely and that connections are sound. If you notice power loss, have the car checked soon to avoid stress on the engine.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes