Skip to content
Fault code dictionary (DTC)

P024C — Charge air cooler bypass position sensor A circuit

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit has detected an electrical problem in the sensor that reports the charge air cooler bypass position. Without a reliable signal it cannot know whether the valve is open or closed. The code is generic and does not say whether the signal is low, high or missing.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Uneven turbo behavior
Possible loss of power
Possible protection mode
Abnormal intake air temperature

Common causes

Corroded or loose sensor connector
Broken or shorted wiring
Faulty position sensor
Damaged bypass actuator
Faulty control unit (rare)

What to do

Check the connector and wiring of the position sensor. It is not usually an absolute emergency, but a missing signal can cause power to be limited, so have it looked at soon.

How to read code P024C

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P024C starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (2) points to fuel and air metering (injector circuit), and the last two (4C) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P024C mean?

Charge air cooler bypass position sensor A circuit. The control unit has detected an electrical problem in the sensor that reports the charge air cooler bypass position. Without a reliable signal it cannot know whether the valve is open or closed. The code is generic and does not say whether the signal is low, high or missing.

Can I keep driving with code P024C active?

With caution: limp mode possible, have it checked soon

Common causes — P024C

Corroded or loose sensor connector Broken or shorted wiring Faulty position sensor Damaged bypass actuator Faulty control unit (rare)

How do you fix code P024C?

Check the connector and wiring of the position sensor. It is not usually an absolute emergency, but a missing signal can cause power to be limited, so have it looked at soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes