Skip to content
Fault code dictionary (DTC)

P0293 — Cylinder 11 contribution or balance fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit noticed that cylinder 11 contributes to engine output differently from the others. The code doesn't say what the cause is: it can come from fuel delivery, ignition or compression. It applies to engines with at least 11 cylinders.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Unstable idle with vibration
Loss of power
Misfires
Rising fuel consumption

Common causes

Cylinder 11 injector dirty or delivering the wrong amount
Spark plug or coil on cylinder 11 in poor condition
Loss of compression in that cylinder
Air leak or intake problem on that cylinder
Injector wiring with a poor contact

What to do

Have the misfire data read and the ignition and injector on cylinder 11 checked. If the engine shakes or the warning light flashes, stop driving and don't push on.

How to read code P0293

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0293 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (2) points to fuel and air metering (injector circuit), and the last two (93) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0293 mean?

Cylinder 11 contribution or balance fault. The control unit noticed that cylinder 11 contributes to engine output differently from the others. The code doesn't say what the cause is: it can come from fuel delivery, ignition or compression. It applies to engines with at least 11 cylinders.

Can I keep driving with code P0293 active?

With caution: limp mode possible, have it checked soon

Common causes — P0293

Cylinder 11 injector dirty or delivering the wrong amount Spark plug or coil on cylinder 11 in poor condition Loss of compression in that cylinder Air leak or intake problem on that cylinder Injector wiring with a poor contact

How do you fix code P0293?

Have the misfire data read and the ignition and injector on cylinder 11 checked. If the engine shakes or the warning light flashes, stop driving and don't push on.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes