Skip to content
Fault code dictionary (DTC)

P02FF — Vehicle inactive timer not performing correctly

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit has an internal timer that measures how long the car has been switched off, and it uses it for certain checks, for example on the fuel vapour recovery system. With this code it judged that the timer is not giving reliable values. The exact meaning and the tests involved depend on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Usually no change in how the car drives
Some control unit self-tests are not completed
Possible failure at inspection because tests have not run
Other codes related to the fuel vapour system

Common causes

Battery recently disconnected or flat
Weak battery that drops in voltage with the engine off
Faulty power or ground to the control unit
Internal problem with the control unit's timer
Control unit software needing an update

What to do

Have the battery, terminals and control unit power supplies checked first. It is usually not urgent for driving, but have it looked at because it can stop the control unit from completing its checks.

How to read code P02FF

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P02FF starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (2) points to fuel and air metering (injector circuit), and the last two (FF) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P02FF mean?

Vehicle inactive timer not performing correctly. The control unit has an internal timer that measures how long the car has been switched off, and it uses it for certain checks, for example on the fuel vapour recovery system. With this code it judged that the timer is not giving reliable values. The exact meaning and the tests involved depend on the manufacturer.

Can I keep driving with code P02FF active?

With caution: limp mode possible, have it checked soon

Common causes — P02FF

Battery recently disconnected or flat Weak battery that drops in voltage with the engine off Faulty power or ground to the control unit Internal problem with the control unit's timer Control unit software needing an update

How do you fix code P02FF?

Have the battery, terminals and control unit power supplies checked first. It is usually not urgent for driving, but have it looked at because it can stop the control unit from completing its checks.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes