Skip to content
Fault code dictionary (DTC)

P0302 — Cylinder 2 Misfire Detected

Severity: Serious Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe engine computer has detected that the second cylinder is not firing properly. This means the fuel inside that specific cylinder is not burning completely, causing the engine to run rough and lose power.
FamilyPowertrain (P)

Typical symptoms

The engine shakes or vibrates noticeably, especially when idling.
The car feels sluggish and lacks power when you press the gas pedal.
The check engine light is flashing or staying on.

Common causes

Worn out or fouled spark plug on cylinder 2.
Defective ignition coil pack for cylinder 2.
Faulty fuel injector on cylinder 2.
Low compression or internal engine wear in cylinder 2.

What to do

Have a mechanic check the spark plug and ignition coil on cylinder 2 first, as these are the most common culprits. It is best not to drive the car for long distances with a flashing check engine light to prevent damaging the exhaust system.
Full guide: P0302: meaning, causes and solutions

How to read code P0302

This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.

The code P0302 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (3) points to ignition system or misfire, and the last two (02) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0302 mean?

Cylinder 2 Misfire Detected. The engine computer has detected that the second cylinder is not firing properly. This means the fuel inside that specific cylinder is not burning completely, causing the engine to run rough and lose power.

Can I keep driving with code P0302 active?

With caution: limp mode possible, have it checked soon

Common causes — P0302

Worn out or fouled spark plug on cylinder 2. Defective ignition coil pack for cylinder 2. Faulty fuel injector on cylinder 2. Low compression or internal engine wear in cylinder 2.

How do you fix code P0302?

Have a mechanic check the spark plug and ignition coil on cylinder 2 first, as these are the most common culprits. It is best not to drive the car for long distances with a flashing check engine light to prevent damaging the exhaust system.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes