Skip to content
Fault code dictionary (DTC)

P0307 — Cylinder 7 misfire detected

Severity: Serious Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit has detected that combustion in cylinder 7 is not happening or is incomplete. It works this out from small irregularities in the rotation of the crankshaft. Which cylinder is number 7 depends on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Check engine light on, possibly flashing
Jerking and vibration
Loss of power
Rough idle
Smell of unburned fuel
Hard starting

Common causes

Worn or fouled spark plug
Faulty ignition coil or lead
Cylinder 7 injector not delivering properly
Insufficient compression in the cylinder
Intake manifold air leak
Poor quality fuel

What to do

Check the spark plug and coil of cylinder 7 first, swapping them with another cylinder's to see if the fault moves. If the light is flashing, stop as soon as possible, because the catalytic converter can be damaged.

How to read code P0307

This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.

The code P0307 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (3) points to ignition system or misfire, and the last two (07) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0307 mean?

Cylinder 7 misfire detected. The control unit has detected that combustion in cylinder 7 is not happening or is incomplete. It works this out from small irregularities in the rotation of the crankshaft. Which cylinder is number 7 depends on the manufacturer.

Can I keep driving with code P0307 active?

With caution: limp mode possible, have it checked soon

Common causes — P0307

Worn or fouled spark plug Faulty ignition coil or lead Cylinder 7 injector not delivering properly Insufficient compression in the cylinder Intake manifold air leak Poor quality fuel

How do you fix code P0307?

Check the spark plug and coil of cylinder 7 first, swapping them with another cylinder's to see if the fault moves. If the light is flashing, stop as soon as possible, because the catalytic converter can be damaged.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes