P0308 — Cylinder 8 misfire detected
| Meaning | The control unit has detected that combustion in cylinder 8 is not happening or is incomplete. It works this out from small irregularities in the rotation of the crankshaft. Cylinder numbering depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Jerking and vibration
Loss of power
Unstable idle
Smell of unburned fuel from the exhaust
Slow or uncertain starting
Common causes
Faulty ignition coil or lead
Faulty cylinder 8 injector
Loss of compression
Air leak near the cylinder
Poor quality fuel
What to do
How to read code P0308
This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.
The code P0308 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (3) points to ignition system or misfire, and the last two (08) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0308 mean?
Cylinder 8 misfire detected. The control unit has detected that combustion in cylinder 8 is not happening or is incomplete. It works this out from small irregularities in the rotation of the crankshaft. Cylinder numbering depends on the manufacturer.
Can I keep driving with code P0308 active?
With caution: limp mode possible, have it checked soon
Common causes — P0308
Worn or fouled spark plug Faulty ignition coil or lead Faulty cylinder 8 injector Loss of compression Air leak near the cylinder Poor quality fuel
How do you fix code P0308?
Have the spark plug and coil of cylinder 8 checked, swapping them with another cylinder's to see if the fault moves. If the light is flashing, reduce engine load straight away and stop as soon as you can.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact usRelated codes
- P0300 — Random/multiple cylinder misfire
- P0301 — Cylinder 1 misfire
- P0302 — Cylinder 2 Misfire Detected
- P0303 — Cylinder 3 Misfire Detected
- P0304 — Cylinder 4 Misfire Detected
- P0305 — Cylinder 5 misfire detected
- P0306 — Cylinder 6 misfire detected
- P0307 — Cylinder 7 misfire detected
- P0309 — Cylinder 9 misfire detected
- P030A — Ignition A control signal circuit open
- P030B — Ignition A control signal circuit low
- P030C — Ignition A control signal circuit high