P0584 — Cruise control vacuum control circuit high
| Meaning | The control unit reads a higher than normal voltage on the cruise control vacuum control circuit. It can come from a short to the supply or a driver fault inside the control unit. It applies to vehicles with a vacuum-operated cruise actuator. |
| Family | Powertrain (P) |
Typical symptoms
Check engine light on
Cruise behaving abnormally
Cruise fault message
Actuator not responding
Common causes
Faulty vacuum solenoid
Damaged connector
Damaged wiring
Driver fault in the control unit, which is rare
What to do
How to read code P0584
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0584 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (84) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0584 mean?
Cruise control vacuum control circuit high. The control unit reads a higher than normal voltage on the cruise control vacuum control circuit. It can come from a short to the supply or a driver fault inside the control unit. It applies to vehicles with a vacuum-operated cruise actuator.
Can I keep driving with code P0584 active?
With caution: limp mode possible, have it checked soon
Common causes — P0584
Control wire shorted to the supply Faulty vacuum solenoid Damaged connector Damaged wiring Driver fault in the control unit, which is rare
How do you fix code P0584?
Inspect the wiring and connector of the vacuum solenoid, then check the component. It does not compromise normal driving. Keep the cruise switched off until the fault is resolved.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0583 — Cruise control vacuum control circuit low
- Next code: P0585 — Cruise control multi-function inputs A/B correlati...
Related codes
- P0500 — Vehicle Speed Sensor Malfunction
- P0501 — Vehicle speed sensor: implausible value
- P0502 — Vehicle speed sensor circuit low input
- P0503 — Vehicle speed sensor intermittent, erratic or high
- P0504 — Brake Switch Correlation Error
- P0505 — Idle Control System Malfunction
- P0506 — Idle speed lower than expected
- P0507 — Idle Control System RPM Higher Than Expected
- P0508 — Idle air control circuit low
- P0509 — Idle air control circuit high
- P050A — Cold start idle control system performance
- P050B — Cold start ignition timing performance