P058C — Battery monitor module: temperature reading not plausible
| Meaning | The control unit found that the temperature values supplied by the battery monitor module are unreliable or do not match other data. The fault may lie in the sensor, the wiring or the module itself. Which type of battery is involved depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Battery cooling fan running more than usual or not starting
Limited power or charging
Unstable charge gauge
Fault message on the dashboard
Common causes
Damaged or corroded sensor wiring or connector
Internal fault in the monitor module
Battery cooling system not working properly
Moisture or corrosion in the battery area
What to do
How to read code P058C
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P058C starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (8C) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P058C mean?
Battery monitor module: temperature reading not plausible. The control unit found that the temperature values supplied by the battery monitor module are unreliable or do not match other data. The fault may lie in the sensor, the wiring or the module itself. Which type of battery is involved depends on the manufacturer.
Can I keep driving with code P058C active?
With caution: limp mode possible, have it checked soon
Common causes — P058C
Faulty battery temperature sensor Damaged or corroded sensor wiring or connector Internal fault in the monitor module Battery cooling system not working properly Moisture or corrosion in the battery area
How do you fix code P058C?
Have the sensor connectors and wiring and the battery cooling operation checked first. Live data is needed to compare the temperatures being read. If it is a high-voltage battery, go to a qualified workshop.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P058B — Battery monitor module: current reading not plausi...
- Next code: P058D — Battery monitor module: voltage reading not plausi...
Related codes
- P0500 — Vehicle Speed Sensor Malfunction
- P0501 — Vehicle speed sensor: implausible value
- P0502 — Vehicle speed sensor circuit low input
- P0503 — Vehicle speed sensor intermittent, erratic or high
- P0504 — Brake Switch Correlation Error
- P0505 — Idle Control System Malfunction
- P0506 — Idle speed lower than expected
- P0507 — Idle Control System RPM Higher Than Expected
- P0508 — Idle air control circuit low
- P0509 — Idle air control circuit high
- P050A — Cold start idle control system performance
- P050B — Cold start ignition timing performance