P058D — Battery monitor module: voltage reading not plausible
| Meaning | The control unit found that the voltage measured by the battery monitor module is unreliable or does not agree with other values. It can come from poor connections, an internal sensor or the module itself. The battery may well be fine. Which battery is involved depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Charge gauge moving up and down oddly
Hard or inconsistent starting
Reduced hybrid or charging functions
Fault message on the dashboard
Common causes
Damaged voltage-sensing wiring
Faulty monitor module
Poor vehicle ground connection
Individual cells or battery groups out of balance
Alternator or charging system giving irregular voltage
What to do
How to read code P058D
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P058D starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (8D) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P058D mean?
Battery monitor module: voltage reading not plausible. The control unit found that the voltage measured by the battery monitor module is unreliable or does not agree with other values. It can come from poor connections, an internal sensor or the module itself. The battery may well be fine. Which battery is involved depends on the manufacturer.
Can I keep driving with code P058D active?
With caution: limp mode possible, have it checked soon
Common causes — P058D
Loose or corroded battery terminals or connectors Damaged voltage-sensing wiring Faulty monitor module Poor vehicle ground connection Individual cells or battery groups out of balance Alternator or charging system giving irregular voltage
How do you fix code P058D?
Have the terminals, grounds and actual battery voltage checked with a meter first, then compare it with what the module reads. If high-voltage batteries are involved, qualified staff are needed. If the car struggles to start, do not wait.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P058C — Battery monitor module: temperature reading not pl...
- Next code: P058E — Battery monitor module: temperature too high
Related codes
- P0500 — Vehicle Speed Sensor Malfunction
- P0501 — Vehicle speed sensor: implausible value
- P0502 — Vehicle speed sensor circuit low input
- P0503 — Vehicle speed sensor intermittent, erratic or high
- P0504 — Brake Switch Correlation Error
- P0505 — Idle Control System Malfunction
- P0506 — Idle speed lower than expected
- P0507 — Idle Control System RPM Higher Than Expected
- P0508 — Idle air control circuit low
- P0509 — Idle air control circuit high
- P050A — Cold start idle control system performance
- P050B — Cold start ignition timing performance