P059D — Active grille air shutter A position sensor circuit low
| Meaning | The control unit found too low a voltage in the position sensor circuit of active grille shutter A, the slats that manage air in front of the radiator. It usually points to a short to ground or a faulty sensor. |
| Family | Powertrain (P) |
Typical symptoms
Grille slats stuck or moving abnormally
Higher engine temperature in traffic
Cooling fan working harder
Higher fuel use at high speed
Common causes
Faulty position sensor
Connector with water or corrosion
Wire worn by rubbing
Control unit with a circuit fault
What to do
How to read code P059D
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P059D starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (9D) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P059D mean?
Active grille air shutter A position sensor circuit low. The control unit found too low a voltage in the position sensor circuit of active grille shutter A, the slats that manage air in front of the radiator. It usually points to a short to ground or a faulty sensor.
Can I keep driving with code P059D active?
With caution: limp mode possible, have it checked soon
Common causes — P059D
Sensor wiring shorted to ground Faulty position sensor Connector with water or corrosion Wire worn by rubbing Control unit with a circuit fault
How do you fix code P059D?
Have the wiring and connector checked for shorts to ground or moisture, then the position sensor. Check engine temperature on long trips or in traffic.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P059C — Active grille air shutter A position sensor circui...
- Next code: P059E — Active grille air shutter A position sensor circui...
Related codes
- P0500 — Vehicle Speed Sensor Malfunction
- P0501 — Vehicle speed sensor: implausible value
- P0502 — Vehicle speed sensor circuit low input
- P0503 — Vehicle speed sensor intermittent, erratic or high
- P0504 — Brake Switch Correlation Error
- P0505 — Idle Control System Malfunction
- P0506 — Idle speed lower than expected
- P0507 — Idle Control System RPM Higher Than Expected
- P0508 — Idle air control circuit low
- P0509 — Idle air control circuit high
- P050A — Cold start idle control system performance
- P050B — Cold start ignition timing performance