Skip to content
Fault code dictionary (DTC)

P063A — Generator voltage sense circuit A fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit reads the voltage produced by the alternator through a dedicated circuit, and has found a fault in this circuit, labelled "A". The code is generic and does not say whether the voltage is too high or too low. The precise meaning of circuit "A" can differ between manufacturers.
FamilyPowertrain (P)

Typical symptoms

Battery or check engine light on
Battery that discharges easily
Headlights varying in brightness
Hard starting after standing
Instruments or electrical accessories working intermittently

Common causes

Corroded or damaged alternator signal wiring or connector
Alternator with a faulty voltage regulator
Earth or supply cables with poor contact
Old or poor-condition battery
Control unit with a faulty sensing input

What to do

Have the battery voltage measured with the engine off and running, and the alternator connections checked. If the battery is not charging, the car can stop on the road: do not leave it for long.

How to read code P063A

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P063A starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (6) points to computer and output circuits, and the last two (3A) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P063A mean?

Generator voltage sense circuit A fault. The control unit reads the voltage produced by the alternator through a dedicated circuit, and has found a fault in this circuit, labelled "A". The code is generic and does not say whether the voltage is too high or too low. The precise meaning of circuit "A" can differ between manufacturers.

Can I keep driving with code P063A active?

With caution: limp mode possible, have it checked soon

Common causes — P063A

Corroded or damaged alternator signal wiring or connector Alternator with a faulty voltage regulator Earth or supply cables with poor contact Old or poor-condition battery Control unit with a faulty sensing input

How do you fix code P063A?

Have the battery voltage measured with the engine off and running, and the alternator connections checked. If the battery is not charging, the car can stop on the road: do not leave it for long.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes