P0694 — Fan 2 control circuit high
| Meaning | The control unit detected that the circuit controlling cooling fan 2 has a higher voltage than normal. Which fan is number 2 depends on the manufacturer. The control may be stuck or unreliable. |
| Family | Powertrain (P) |
Typical symptoms
Fan running all the time, even with a cold engine
Fan not stopping with the key removed
Engine temperature rising
Battery draining faster
Common causes
Control wire touching a positive supply
Faulty fan control module
Damaged connector or wiring
Internal control unit fault (uncommon)
What to do
How to read code P0694
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0694 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (6) points to computer and output circuits, and the last two (94) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0694 mean?
Fan 2 control circuit high. The control unit detected that the circuit controlling cooling fan 2 has a higher voltage than normal. Which fan is number 2 depends on the manufacturer. The control may be stuck or unreliable.
Can I keep driving with code P0694 active?
With caution: limp mode possible, have it checked soon
Common causes — P0694
Fan relay with stuck contacts Control wire touching a positive supply Faulty fan control module Damaged connector or wiring Internal control unit fault (uncommon)
How do you fix code P0694?
Check the fan relay and wiring, and see whether the fan runs even with a cold engine. If the temperature climbs, stop and have the car checked.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact usRelated codes
- P0600 — Serial communication link malfunction
- P0601 — Internal Control Module Memory Check Sum Error
- P0602 — Control module programming error
- P0603 — Internal Control Module Keep Alive Memory (KAM) Error
- P0604 — Internal control module RAM error
- P0605 — Internal Control Module Read Only Memory (ROM) Error
- P0606 — Control module processor fault
- P0607 — Control module performance out of range
- P0608 — Control module speed signal output A malfunction
- P0609 — Control module speed signal output B malfunction
- P060A — Internal control module monitoring processor fault
- P060B — Internal control module A/D conversion fault