Skip to content
Fault code dictionary (DTC)

P06A1 — Variable A/C compressor control circuit low

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit measured a voltage that is too low in the circuit that controls the variable-displacement A/C compressor. It usually points to a broken wire, a short to ground or a faulty component.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Weak air conditioning
Compressor not engaging
Air not cold
A/C working only intermittently

Common causes

Wire broken or shorted to ground toward the compressor valve
Corroded or unplugged connector
Faulty control valve
Internal compressor fault
Faulty control unit output

What to do

Start with the connector and wiring of the regulating valve. You can use the car, but keep the A/C off until it has been checked, so you don't stress the compressor.

How to read code P06A1

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P06A1 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (6) points to computer and output circuits, and the last two (A1) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P06A1 mean?

Variable A/C compressor control circuit low. The control unit measured a voltage that is too low in the circuit that controls the variable-displacement A/C compressor. It usually points to a broken wire, a short to ground or a faulty component.

Can I keep driving with code P06A1 active?

With caution: limp mode possible, have it checked soon

Common causes — P06A1

Wire broken or shorted to ground toward the compressor valve Corroded or unplugged connector Faulty control valve Internal compressor fault Faulty control unit output

How do you fix code P06A1?

Start with the connector and wiring of the regulating valve. You can use the car, but keep the A/C off until it has been checked, so you don't stress the compressor.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes