Skip to content
Fault code dictionary (DTC)

P06A3 — Sensor reference voltage D circuit open

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit can't detect the reference voltage 'D' that feeds a group of sensors: the circuit appears open or interrupted. Which sensors are connected is decided by the manufacturer, so I can't say in general.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Loss of power or limp mode
Rough running
Missing or inconsistent sensor readings
Other related sensor codes

Common causes

Reference wire broken or disconnected
Corroded sensor connector or a terminal pushed out
A sensor with an internal fault breaking the circuit
Wiring damaged by rubbing or rodents
Internal control unit fault

What to do

Have the associated sensor codes read and check connectors and wiring along the route. If the car goes into protection mode, avoid driving it for long.

How to read code P06A3

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P06A3 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (6) points to computer and output circuits, and the last two (A3) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P06A3 mean?

Sensor reference voltage D circuit open. The control unit can't detect the reference voltage 'D' that feeds a group of sensors: the circuit appears open or interrupted. Which sensors are connected is decided by the manufacturer, so I can't say in general.

Can I keep driving with code P06A3 active?

With caution: limp mode possible, have it checked soon

Common causes — P06A3

Reference wire broken or disconnected Corroded sensor connector or a terminal pushed out A sensor with an internal fault breaking the circuit Wiring damaged by rubbing or rodents Internal control unit fault

How do you fix code P06A3?

Have the associated sensor codes read and check connectors and wiring along the route. If the car goes into protection mode, avoid driving it for long.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes