P06AA — Control module internal temperature B too high
| Meaning | The control module's internal temperature sensor 'B' indicates that the electronics are overheating beyond the allowed limit. Which module is affected and where the sensor sits depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power or limp mode
Irregular running, especially when hot
Sudden shutdowns in serious cases
Other communication codes or codes for controlled components
Common causes
Excessive load on an output, for example a shorted component
Very high ambient temperature
Cooling problem in the area where it is installed
Internal module fault
What to do
How to read code P06AA
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P06AA starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (6) points to computer and output circuits, and the last two (AA) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P06AA mean?
Control module internal temperature B too high. The control module's internal temperature sensor 'B' indicates that the electronics are overheating beyond the allowed limit. Which module is affected and where the sensor sits depends on the manufacturer.
Can I keep driving with code P06AA active?
With caution: limp mode possible, have it checked soon
Common causes — P06AA
Module mounted near heat sources or with poor ventilation Excessive load on an output, for example a shorted component Very high ambient temperature Cooling problem in the area where it is installed Internal module fault
How do you fix code P06AA?
Check that no controlled component is shorted or output overloaded, and check the module's position and cooling. If the code returns when hot, avoid prolonged heavy use until it is checked.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P06A9 — Sensor reference voltage D circuit range/performan...
- Next code: P06AB — Control module internal temperature sensor B circu...
Related codes
- P0600 — Serial communication link malfunction
- P0601 — Internal Control Module Memory Check Sum Error
- P0602 — Control module programming error
- P0603 — Internal Control Module Keep Alive Memory (KAM) Error
- P0604 — Internal control module RAM error
- P0605 — Internal Control Module Read Only Memory (ROM) Error
- P0606 — Control module processor fault
- P0607 — Control module performance out of range
- P0608 — Control module speed signal output A malfunction
- P0609 — Control module speed signal output B malfunction
- P060A — Internal control module monitoring processor fault
- P060B — Internal control module A/D conversion fault