Skip to content
Fault code dictionary (DTC)

P06BF — Cylinder 7 glow plug circuit: range/performance

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThis code concerns a diesel engine. The control module checked the cylinder 7 glow plug circuit and found values outside the expected range or irregular operation. It doesn't say whether the glow plug or the wiring is at fault.
FamilyPowertrain (P)

Typical symptoms

Hard starting when cold
White or gray smoke after start-up
Glow plug light or check engine light on
Rough running when cold
Noisier running in the first minutes

Common causes

Worn glow plug or one with out-of-range resistance
Corroded or loose glow plug connector or wire
Faulty glow plug control module
Low supply voltage from a weak battery
Glow plug damaged during an earlier removal

What to do

Have the glow plug resistance measured and check the connector, as this often tells you what you need. In warm weather the car may run almost normally, but cold starting gets worse. Don't leave it too long, especially before winter.

How to read code P06BF

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P06BF starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (6) points to computer and output circuits, and the last two (BF) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P06BF mean?

Cylinder 7 glow plug circuit: range/performance. This code concerns a diesel engine. The control module checked the cylinder 7 glow plug circuit and found values outside the expected range or irregular operation. It doesn't say whether the glow plug or the wiring is at fault.

Can I keep driving with code P06BF active?

With caution: limp mode possible, have it checked soon

Common causes — P06BF

Worn glow plug or one with out-of-range resistance Corroded or loose glow plug connector or wire Faulty glow plug control module Low supply voltage from a weak battery Glow plug damaged during an earlier removal

How do you fix code P06BF?

Have the glow plug resistance measured and check the connector, as this often tells you what you need. In warm weather the car may run almost normally, but cold starting gets worse. Don't leave it too long, especially before winter.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes