Skip to content
Fault code dictionary (DTC)

P06C3 — Cylinder 11 glow plug circuit range/performance

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit measured a current or resistance in the cylinder 11 glow plug circuit that is outside the expected values. The glow plug may be worn out, or there may be a wiring or connection problem. A cylinder number this high normally means a 12-cylinder diesel, so check the cylinder numbering against your vehicle's manual.
FamilyPowertrain (P)

Typical symptoms

Hard starting when the engine is cold
White or grey smoke after a cold start
Rough running during the first minutes
Glow plug or engine warning light on
More vibration while the engine is cold

Common causes

Aged cylinder 11 glow plug with altered resistance
Corroded or loose glow plug connector or terminal
Damaged wiring or wiring with abnormal resistance
Glow plug control module with a faulty output
Low supply voltage from a weak battery or poor ground

What to do

Have the glow plug resistance and the condition of the connector and wiring checked first. You can drive for a short time, but the longer you wait the worse cold starting gets and the harder the engine works.

How to read code P06C3

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P06C3 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (6) points to computer and output circuits, and the last two (C3) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P06C3 mean?

Cylinder 11 glow plug circuit range/performance. The control unit measured a current or resistance in the cylinder 11 glow plug circuit that is outside the expected values. The glow plug may be worn out, or there may be a wiring or connection problem. A cylinder number this high normally means a 12-cylinder diesel, so check the cylinder numbering against your vehicle's manual.

Can I keep driving with code P06C3 active?

With caution: limp mode possible, have it checked soon

Common causes — P06C3

Aged cylinder 11 glow plug with altered resistance Corroded or loose glow plug connector or terminal Damaged wiring or wiring with abnormal resistance Glow plug control module with a faulty output Low supply voltage from a weak battery or poor ground

How do you fix code P06C3?

Have the glow plug resistance and the condition of the connector and wiring checked first. You can drive for a short time, but the longer you wait the worse cold starting gets and the harder the engine works.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes