Skip to content
Fault code dictionary (DTC)

P06DA — Engine oil pressure control: open circuit

Severity: Critical Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe engine control unit commands a device that regulates oil pressure in the engine, for example a valve or a variable-flow pump. It detected that the control circuit is broken, meaning the device is not receiving the command. The type of component varies from one manufacturer to another.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Possible oil pressure warning light on
Unusual engine noises, especially when cold
Reduced power or limp mode
Oil consumption or oil temperature different from usual

Common causes

Regulator connector unplugged or corroded
Broken wire in the harness to the valve
Open coil in the control valve
Wiring damaged by heat or chafing
Internal fault in the control unit

What to do

First check the oil level and see whether the oil pressure warning light is on. If it is on or the engine makes unusual noises, stop driving: lubrication is vital. Otherwise inspect the regulator connector and wiring.

How to read code P06DA

This is a critical fault: vehicle safety or integrity may be compromised, so diagnosis should not be postponed.

The code P06DA starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (6) points to computer and output circuits, and the last two (DA) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P06DA mean?

Engine oil pressure control: open circuit. The engine control unit commands a device that regulates oil pressure in the engine, for example a valve or a variable-flow pump. It detected that the control circuit is broken, meaning the device is not receiving the command. The type of component varies from one manufacturer to another.

Can I keep driving with code P06DA active?

With caution: limp mode possible, have it checked soon

Common causes — P06DA

Regulator connector unplugged or corroded Broken wire in the harness to the valve Open coil in the control valve Wiring damaged by heat or chafing Internal fault in the control unit

How do you fix code P06DA?

First check the oil level and see whether the oil pressure warning light is on. If it is on or the engine makes unusual noises, stop driving: lubrication is vital. Otherwise inspect the regulator connector and wiring.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes