P06FF — Economy mode lamp control circuit: electrical fault
| Meaning | The control unit found an electrical problem in the circuit that switches the economy (Eco) mode indicator lamp. The fault concerns the indicator, meaning the circuit that lights it, and normally not the driving itself. The exact meaning of the circuit can vary by manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Eco lamp stays on all the time
Check engine light on with no other obvious problem
No noticeable difference in how the car drives
Common causes
Damaged wiring or connector in the lamp circuit
Internal fault in the instrument cluster
Faulty control output in the control unit (rare)
What to do
How to read code P06FF
This is an informational entry: it normally does not limit how the vehicle works.
The code P06FF starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (6) points to computer and output circuits, and the last two (FF) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P06FF mean?
Economy mode lamp control circuit: electrical fault. The control unit found an electrical problem in the circuit that switches the economy (Eco) mode indicator lamp. The fault concerns the indicator, meaning the circuit that lights it, and normally not the driving itself. The exact meaning of the circuit can vary by manufacturer.
Can I keep driving with code P06FF active?
With caution: limp mode possible, have it checked soon
Common causes — P06FF
Faulty bulb or LED for the lamp in the instrument cluster Damaged wiring or connector in the lamp circuit Internal fault in the instrument cluster Faulty control output in the control unit (rare)
How do you fix code P06FF?
This is not urgent: you can usually keep using the car normally. Have the instrument cluster and the lamp wiring checked at the next service or at the first convenient moment. If other codes or other faults appear as well, get a full diagnosis.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P06FE — Diesel cold start: intake air flow control not per...
- Next code: P0700 — Transmission control system: MIL request
Related codes
- P0600 — Serial communication link malfunction
- P0601 — Internal Control Module Memory Check Sum Error
- P0602 — Control module programming error
- P0603 — Internal Control Module Keep Alive Memory (KAM) Error
- P0604 — Internal control module RAM error
- P0605 — Internal Control Module Read Only Memory (ROM) Error
- P0606 — Control module processor fault
- P0607 — Control module performance out of range
- P0608 — Control module speed signal output A malfunction
- P0609 — Control module speed signal output B malfunction
- P060A — Internal control module monitoring processor fault
- P060B — Internal control module A/D conversion fault