Skip to content
Fault code dictionary (DTC)

P0A2A — Drive motor A temperature sensor circuit fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected an electrical problem in the circuit of the sensor that measures drive motor A's temperature. Without this data it cannot protect the motor from overheating. The code is generic and does not say whether the signal is high, low or unstable.
FamilyPowertrain (P)

Typical symptoms

Hybrid or electric system warning light on
Power limited as a precaution
Cooling fans running constantly
Limp mode
Warning messages on the dashboard

Common causes

Corroded or loose sensor connector
Damaged or shorted wiring
Faulty temperature sensor
Unstable sensor reference supply
Control unit fault

What to do

Have the connector, wiring and the value read from the sensor checked with a scan tool, comparing it with the real temperature. Do not work on high-voltage parts unless qualified. If power is limited, use the car as little as possible.

How to read code P0A2A

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0A2A starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (2A) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0A2A mean?

Drive motor A temperature sensor circuit fault. The control unit detected an electrical problem in the circuit of the sensor that measures drive motor A's temperature. Without this data it cannot protect the motor from overheating. The code is generic and does not say whether the signal is high, low or unstable.

Can I keep driving with code P0A2A active?

With caution: limp mode possible, have it checked soon

Common causes — P0A2A

Corroded or loose sensor connector Damaged or shorted wiring Faulty temperature sensor Unstable sensor reference supply Control unit fault

How do you fix code P0A2A?

Have the connector, wiring and the value read from the sensor checked with a scan tool, comparing it with the real temperature. Do not work on high-voltage parts unless qualified. If power is limited, use the car as little as possible.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes