Skip to content
Fault code dictionary (DTC)

P0A29 — Hybrid battery disconnect circuit voltage high

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit sees a higher than expected voltage in the circuit that disconnects the high-voltage battery. It can come from a short to supply voltage, a faulty component or a control unit problem. The circuit is tied to high-voltage safety.
FamilyPowertrain (P)

Typical symptoms

Hybrid or electric system warning light on
Car will not enter ready mode
System shuts down suddenly
Charging not possible
High-voltage check messages

Common causes

Wiring shorted to supply voltage
Damaged connector
Faulty relay or contactor
Unstable 12 V supply
Battery control unit fault

What to do

Do not open or touch the high-voltage battery and orange cables. Have the wiring, connectors and disconnect components checked by qualified staff. If the system shuts down while driving or will not start, do not keep trying.

How to read code P0A29

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0A29 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (29) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0A29 mean?

Hybrid battery disconnect circuit voltage high. The control unit sees a higher than expected voltage in the circuit that disconnects the high-voltage battery. It can come from a short to supply voltage, a faulty component or a control unit problem. The circuit is tied to high-voltage safety.

Can I keep driving with code P0A29 active?

With caution: limp mode possible, have it checked soon

Common causes — P0A29

Wiring shorted to supply voltage Damaged connector Faulty relay or contactor Unstable 12 V supply Battery control unit fault

How do you fix code P0A29?

Do not open or touch the high-voltage battery and orange cables. Have the wiring, connectors and disconnect components checked by qualified staff. If the system shuts down while driving or will not start, do not keep trying.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes