Skip to content
Fault code dictionary (DTC)

P0A33 — Drive motor B temperature sensor: signal too high

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit measured a voltage that is too high on the motor B temperature sensor circuit. This usually means a broken wire, an unplugged connector or a detached sensor. The system no longer has a valid temperature reading.
FamilyPowertrain (P)

Typical symptoms

Hybrid/electric system warning light on
Limited power
Fans running at full speed
Fault message on the dashboard
Possible limp mode

Common causes

Broken sensor wire
Unplugged connector or corroded terminals
Failed or open-circuit temperature sensor
Cut or stretched wiring
Internal control unit fault

What to do

Have the connectors and wiring of the sensor checked at a workshop qualified for high voltage. This is not a fault to neglect: without a reading the control unit limits power as a precaution.

How to read code P0A33

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0A33 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (33) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0A33 mean?

Drive motor B temperature sensor: signal too high. The control unit measured a voltage that is too high on the motor B temperature sensor circuit. This usually means a broken wire, an unplugged connector or a detached sensor. The system no longer has a valid temperature reading.

Can I keep driving with code P0A33 active?

With caution: limp mode possible, have it checked soon

Common causes — P0A33

Broken sensor wire Unplugged connector or corroded terminals Failed or open-circuit temperature sensor Cut or stretched wiring Internal control unit fault

How do you fix code P0A33?

Have the connectors and wiring of the sensor checked at a workshop qualified for high voltage. This is not a fault to neglect: without a reading the control unit limits power as a precaution.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes