Skip to content
Fault code dictionary (DTC)

P0A34 — Drive motor B temperature sensor: intermittent signal

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected that the signal from the motor B temperature sensor drops out at times. It is usually a contact that is lost with vibration or moisture. When the signal is missing, the motor is not monitored properly.
FamilyPowertrain (P)

Typical symptoms

Warning light that comes on at intervals
Occasional loss of power
Fans changing speed for no reason
Fault message that comes and goes

Common causes

Connector with a weak contact
Partially damaged wiring
Temperature sensor working intermittently
Moisture or corrosion in the terminals
Internal control unit problem

What to do

Have the wiring and connectors checked at a workshop qualified for high-voltage vehicles, ideally by moving the cables while reading live data. The fault is occasional, but it should not be left alone.

How to read code P0A34

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0A34 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (34) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0A34 mean?

Drive motor B temperature sensor: intermittent signal. The control unit detected that the signal from the motor B temperature sensor drops out at times. It is usually a contact that is lost with vibration or moisture. When the signal is missing, the motor is not monitored properly.

Can I keep driving with code P0A34 active?

With caution: limp mode possible, have it checked soon

Common causes — P0A34

Connector with a weak contact Partially damaged wiring Temperature sensor working intermittently Moisture or corrosion in the terminals Internal control unit problem

How do you fix code P0A34?

Have the wiring and connectors checked at a workshop qualified for high-voltage vehicles, ideally by moving the cables while reading live data. The fault is occasional, but it should not be left alone.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes