P0A35 — Drive motor B over temperature
| Meaning | The control unit detected that drive motor B exceeded its maximum allowed temperature. To protect it, the system reduces power. The most common cause is cooling that is not removing enough heat. |
| Family | Powertrain (P) |
Typical symptoms
Weak acceleration
Very loud cooling fans
Overheating message on the dashboard
Limp mode
Common causes
Failed coolant pump
Blocked or dirty radiator
Fan not starting
Prolonged heavy use, such as hill climbs under load
Temperature sensor showing a wrong value
What to do
How to read code P0A35
This is a critical fault: vehicle safety or integrity may be compromised, so diagnosis should not be postponed.
The code P0A35 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (35) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0A35 mean?
Drive motor B over temperature. The control unit detected that drive motor B exceeded its maximum allowed temperature. To protect it, the system reduces power. The most common cause is cooling that is not removing enough heat.
Can I keep driving with code P0A35 active?
With caution: limp mode possible, have it checked soon
Common causes — P0A35
Low coolant or air in the cooling circuit Failed coolant pump Blocked or dirty radiator Fan not starting Prolonged heavy use, such as hill climbs under load Temperature sensor showing a wrong value
How do you fix code P0A35?
Pull over safely and let the vehicle cool before continuing. If the code returns, have the cooling checked at a workshop qualified for high voltage, and do not open any system components yourself.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0A34 — Drive motor B temperature sensor: intermittent sig...
- Next code: P0A36 — Generator temperature sensor circuit fault
Related codes
- P0A00 — Motor electronics coolant temperature sensor circuit fault
- P0A01 — Motor electronics coolant temperature sensor implausible
- P0A02 — Motor electronics coolant temperature sensor signal too low
- P0A03 — Motor electronics coolant temperature sensor signal too high
- P0A04 — Motor electronics coolant temperature sensor intermittent
- P0A05 — Motor electronics coolant pump control circuit open
- P0A06 — Motor electronics coolant pump control circuit low
- P0A07 — Motor electronics coolant pump control circuit high
- P0A08 — DC/DC converter status circuit fault
- P0A09 — DC/DC converter status signal too low
- P0A0A — High voltage system interlock circuit A fault
- P0A0B — High voltage interlock circuit A performance problem