P0A56 — Drive motor B current sensor signal not plausible
| Meaning | The hybrid or electric control unit read a value from the drive motor B current sensor that does not match what it expects at that moment. The signal is arriving, but it does not agree with how the motor is really working. Which motor counts as B is set by the manufacturer. On most cars it is the second electric motor, but I cannot say for sure on yours without knowing the make and model. |
| Family | Powertrain (P) |
Typical symptoms
Reduced electric power or jerky delivery
Petrol or diesel engine stays on longer than usual
Limited electric assist when accelerating
Warning message on the instrument cluster
Common causes
Current sensor drifting or failing internally
Damaged sensor wiring or worn insulation
Fault in the inverter that drives motor B
Unstable sensor supply voltage
Fault in the hybrid control unit (rare)
What to do
How to read code P0A56
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0A56 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (56) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0A56 mean?
Drive motor B current sensor signal not plausible. The hybrid or electric control unit read a value from the drive motor B current sensor that does not match what it expects at that moment. The signal is arriving, but it does not agree with how the motor is really working. Which motor counts as B is set by the manufacturer. On most cars it is the second electric motor, but I cannot say for sure on yours without knowing the make and model.
Can I keep driving with code P0A56 active?
With caution: limp mode possible, have it checked soon
Common causes — P0A56
Corroded or loose sensor connector or wiring Current sensor drifting or failing internally Damaged sensor wiring or worn insulation Fault in the inverter that drives motor B Unstable sensor supply voltage Fault in the hybrid control unit (rare)
How do you fix code P0A56?
Have the live data read with a tool made for hybrid systems, to see whether the sensor value is unstable. Check the accessible connectors and wiring first, but never touch the orange high-voltage cables: those are for qualified staff only. It is not an immediate emergency, but have the car checked soon, because the system may limit power.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0A55 — Drive motor B current sensor circuit fault
- Next code: P0A57 — Drive motor B current sensor signal too low
Related codes
- P0A00 — Motor electronics coolant temperature sensor circuit fault
- P0A01 — Motor electronics coolant temperature sensor implausible
- P0A02 — Motor electronics coolant temperature sensor signal too low
- P0A03 — Motor electronics coolant temperature sensor signal too high
- P0A04 — Motor electronics coolant temperature sensor intermittent
- P0A05 — Motor electronics coolant pump control circuit open
- P0A06 — Motor electronics coolant pump control circuit low
- P0A07 — Motor electronics coolant pump control circuit high
- P0A08 — DC/DC converter status circuit fault
- P0A09 — DC/DC converter status signal too low
- P0A0A — High voltage system interlock circuit A fault
- P0A0B — High voltage interlock circuit A performance problem