P0A58 — Drive motor B current sensor signal too high
| Meaning | The control unit found that the signal from the drive motor B current sensor is above the maximum it expects. It can come from a short to supply in the circuit, a faulty sensor, or a genuinely abnormal current. What counts as motor B is defined by the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Limited power or irregular delivery
Electric system shutting down suddenly
Combustion engine stays running
Fault message on the cluster
Common causes
Faulty current sensor
Damaged or damp connector
Real current problem in the inverter or motor
Sensor supply out of range
Control unit fault (rare)
What to do
How to read code P0A58
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0A58 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (58) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0A58 mean?
Drive motor B current sensor signal too high. The control unit found that the signal from the drive motor B current sensor is above the maximum it expects. It can come from a short to supply in the circuit, a faulty sensor, or a genuinely abnormal current. What counts as motor B is defined by the manufacturer.
Can I keep driving with code P0A58 active?
With caution: limp mode possible, have it checked soon
Common causes — P0A58
Short to supply in the sensor wiring Faulty current sensor Damaged or damp connector Real current problem in the inverter or motor Sensor supply out of range Control unit fault (rare)
How do you fix code P0A58?
Have the live data read to see whether the high value is real or just a sensor error. Check wiring and connectors, without touching the high-voltage cables. If the current really is abnormal, the system protects itself by limiting power, so have the car checked soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0A57 — Drive motor B current sensor signal too low
- Next code: P0A59 — Generator current sensor circuit fault
Related codes
- P0A00 — Motor electronics coolant temperature sensor circuit fault
- P0A01 — Motor electronics coolant temperature sensor implausible
- P0A02 — Motor electronics coolant temperature sensor signal too low
- P0A03 — Motor electronics coolant temperature sensor signal too high
- P0A04 — Motor electronics coolant temperature sensor intermittent
- P0A05 — Motor electronics coolant pump control circuit open
- P0A06 — Motor electronics coolant pump control circuit low
- P0A07 — Motor electronics coolant pump control circuit high
- P0A08 — DC/DC converter status circuit fault
- P0A09 — DC/DC converter status signal too low
- P0A0A — High voltage system interlock circuit A fault
- P0A0B — High voltage interlock circuit A performance problem