P0A66 — Drive motor B phase U current fault
| Meaning | The control unit found a problem measuring current on phase U of drive motor B. This is usually the second electric motor, but the exact definition depends on the manufacturer. The code is general and does not say whether the value is high, low or inconsistent. |
| Family | Powertrain (P) |
Typical symptoms
Reduced electric power
Jerking or vibration when accelerating
Switching to combustion engine only
Fault message on the display
Common causes
Damaged sensor connector or wiring
Inverter problem
Defective phase U connection to motor B
Unstable sensor supply
Motor winding defect (rare)
What to do
How to read code P0A66
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0A66 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (66) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0A66 mean?
Drive motor B phase U current fault. The control unit found a problem measuring current on phase U of drive motor B. This is usually the second electric motor, but the exact definition depends on the manufacturer. The code is general and does not say whether the value is high, low or inconsistent.
Can I keep driving with code P0A66 active?
With caution: limp mode possible, have it checked soon
Common causes — P0A66
Faulty motor B phase U current sensor Damaged sensor connector or wiring Inverter problem Defective phase U connection to motor B Unstable sensor supply Motor winding defect (rare)
How do you fix code P0A66?
Have the live data and freeze frame read with a tool suited to hybrid systems. Do not touch the orange high-voltage cables. Have the car checked soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0A65 — Drive motor A phase W current too high
- Next code: P0A67 — Drive motor B phase U current too low
Related codes
- P0A00 — Motor electronics coolant temperature sensor circuit fault
- P0A01 — Motor electronics coolant temperature sensor implausible
- P0A02 — Motor electronics coolant temperature sensor signal too low
- P0A03 — Motor electronics coolant temperature sensor signal too high
- P0A04 — Motor electronics coolant temperature sensor intermittent
- P0A05 — Motor electronics coolant pump control circuit open
- P0A06 — Motor electronics coolant pump control circuit low
- P0A07 — Motor electronics coolant pump control circuit high
- P0A08 — DC/DC converter status circuit fault
- P0A09 — DC/DC converter status signal too low
- P0A0A — High voltage system interlock circuit A fault
- P0A0B — High voltage interlock circuit A performance problem