Skip to content
Fault code dictionary (DTC)

P0A67 — Drive motor B phase U current too low

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit measures a lower current than expected on phase U of motor B, or a signal below the minimum. Typical causes are a broken circuit, a sensor that is not reading, or a poor connection. Which motor is B is decided by the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Hybrid system warning light on
Reduced electric power
Weak acceleration
Combustion engine stepping in more
Fault message on the cluster

Common causes

Faulty motor B phase U current sensor
Broken or corroded sensor wire or connector
Loose phase U connection to motor B
Inverter problem
Missing sensor supply
Motor defect (rare)

What to do

Check the sensor connectors and wiring and have the live data read. Do not work on the high-voltage cables unless you are qualified. Have the car checked soon.

How to read code P0A67

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0A67 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (67) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0A67 mean?

Drive motor B phase U current too low. The control unit measures a lower current than expected on phase U of motor B, or a signal below the minimum. Typical causes are a broken circuit, a sensor that is not reading, or a poor connection. Which motor is B is decided by the manufacturer.

Can I keep driving with code P0A67 active?

With caution: limp mode possible, have it checked soon

Common causes — P0A67

Faulty motor B phase U current sensor Broken or corroded sensor wire or connector Loose phase U connection to motor B Inverter problem Missing sensor supply Motor defect (rare)

How do you fix code P0A67?

Check the sensor connectors and wiring and have the live data read. Do not work on the high-voltage cables unless you are qualified. Have the car checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes