P0A68 — Drive motor B phase U current too high
| Meaning | The control unit measures a current above the limit on phase U of motor B, or a signal above the maximum. It can be a faulty sensor, a short in the circuit, or a real overcurrent in the motor or inverter. Which motor is B is decided by the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Electric drive limited or cut
Vibration or jerking
Reduced power
Fault message on the display
Common causes
Short to supply in the wiring
Real overcurrent in the inverter
Motor insulation or winding defect
Damaged phase cable
Sensor supply out of range
What to do
How to read code P0A68
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0A68 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (68) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0A68 mean?
Drive motor B phase U current too high. The control unit measures a current above the limit on phase U of motor B, or a signal above the maximum. It can be a faulty sensor, a short in the circuit, or a real overcurrent in the motor or inverter. Which motor is B is decided by the manufacturer.
Can I keep driving with code P0A68 active?
With caution: limp mode possible, have it checked soon
Common causes — P0A68
Faulty motor B phase U current sensor Short to supply in the wiring Real overcurrent in the inverter Motor insulation or winding defect Damaged phase cable Sensor supply out of range
How do you fix code P0A68?
Have the live data and freeze frame read. If the overcurrent is real, the fault can be serious, so do not delay the check. Do not touch the orange high-voltage cables.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0A67 — Drive motor B phase U current too low
- Next code: P0A69 — Drive motor B phase V current fault
Related codes
- P0A00 — Motor electronics coolant temperature sensor circuit fault
- P0A01 — Motor electronics coolant temperature sensor implausible
- P0A02 — Motor electronics coolant temperature sensor signal too low
- P0A03 — Motor electronics coolant temperature sensor signal too high
- P0A04 — Motor electronics coolant temperature sensor intermittent
- P0A05 — Motor electronics coolant pump control circuit open
- P0A06 — Motor electronics coolant pump control circuit low
- P0A07 — Motor electronics coolant pump control circuit high
- P0A08 — DC/DC converter status circuit fault
- P0A09 — DC/DC converter status signal too low
- P0A0A — High voltage system interlock circuit A fault
- P0A0B — High voltage interlock circuit A performance problem