P0A96 — Battery cooling fan 2: control circuit open
| Meaning | The control unit has detected a problem in the circuit that drives battery cooling fan 2 in the hybrid or electric battery system. The circuit appears broken or does not respond as it should. Without the fan the battery can get too hot, and the system limits power to protect it. |
| Family | Powertrain (P) |
Typical symptoms
Battery fan not starting, even with a hot battery
Reduced power when the battery warms up
Slower or interrupted charging
High battery temperature message
Higher fuel consumption than usual
Common causes
Broken or damaged control wire
Faulty fan motor
Faulty fan supply relay or fuse
Blocked air intake grille or duct
A problem in the control unit that drives the fan
What to do
How to read code P0A96
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0A96 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (96) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0A96 mean?
Battery cooling fan 2: control circuit open. The control unit has detected a problem in the circuit that drives battery cooling fan 2 in the hybrid or electric battery system. The circuit appears broken or does not respond as it should. Without the fan the battery can get too hot, and the system limits power to protect it.
Can I keep driving with code P0A96 active?
With caution: limp mode possible, have it checked soon
Common causes — P0A96
Fan connector unplugged or corroded Broken or damaged control wire Faulty fan motor Faulty fan supply relay or fuse Blocked air intake grille or duct A problem in the control unit that drives the fan
How do you fix code P0A96?
Check that the battery air intake, usually near the rear seats, is not covered by objects, dirt or pet hair. Then have the fan circuit and its connections checked at a workshop. Avoid long trips or heavy loads until it is fixed, because the battery could overheat.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0A95 — High-voltage fuse A, circuit fault
- Next code: P0A97 — Battery cooling fan 2: poor performance or stuck o...
Related codes
- P0A00 — Motor electronics coolant temperature sensor circuit fault
- P0A01 — Motor electronics coolant temperature sensor implausible
- P0A02 — Motor electronics coolant temperature sensor signal too low
- P0A03 — Motor electronics coolant temperature sensor signal too high
- P0A04 — Motor electronics coolant temperature sensor intermittent
- P0A05 — Motor electronics coolant pump control circuit open
- P0A06 — Motor electronics coolant pump control circuit low
- P0A07 — Motor electronics coolant pump control circuit high
- P0A08 — DC/DC converter status circuit fault
- P0A09 — DC/DC converter status signal too low
- P0A0A — High voltage system interlock circuit A fault
- P0A0B — High voltage interlock circuit A performance problem